ATP5030 UV-Vis Spectrometer employs the ultra-high performance, high-sensitivity, high resolution, and cost-effective model. It's ideal for Raman system well. It uses 2048 x 64 pixel, a back-thinned CCD array, TE-cooled down to -10 ℃. Sensor noise is reduced, and SNR is almost 2 times higher than others. Increased reliability can remain measure result do not change with temperature.
Customized design of ultra-low noise CCD signal processing circuit built inside, Noise is lower can 3 counts is ahead of records in the industries.
ATP5030 is designed with SMA905 optic fiber entrance connector or free space, and it outputs spectral data via USB2.0/UART
DETECTOR |
Detector Type |
Back - illum CCD |
Spectral Range |
350-800nm, 200-400nm, 200-850nm, 200-1000 nm, 600-1000nm, 800-1000nm |
Effective Pixels |
2048*24 |
Pixels Dimension |
14μm×14μm |
Full Well Capacity |
300 ke- |
Detector Model |
Hamamtsu s10420+TEC or s11850 |
Sensitivity |
6.5 uV/e- |
Dark Noise |
6 e-rms |
OPTICAL PARAMETER |
Wavelength Range |
350-800nm, 200-400nm, 200-850nm, 200-1000 nm, 600-1000nm, 800-1000nm |
Optical Resolution |
0.05-3 nm |
Signal-To-Noise |
>600:1 |
Dynamic Range |
50000:1 |
Working Temperature |
-10°c to + 50°c |
Numberical Aperture |
0.07 |
Working Humidity |
< 90% NC |
Trigger |
YES (IN and OUT) |
Cooling Temperature |
-5°c |
Scanning Rate |
< 1 kfps |
OPTICAL CONFIGURATION |
Optical Design |
M-type |
Focal Distance |
75mm |
Incident Slit |
50 μm (5, 10, 25, 50, 100, or 200 μm optional) |
Incident Interface |
SMA905 connector,free space |
ELECTRICAL PARAMETER |
Integration Time |
10 ms - 15 min |
Interfaces |
USB 2.0 (480MHz High speed) |
A/D Conversion Resolution |
18 bit |
Supply Voltage |
DC4.5 to 5.5 V (type @5V) |
Operating Current |
<2.3A |
Storage Temperature |
-30°c to + 70 °c |
PHYSICAL PARAMETERS |
Dimension |
150 × 90 × 37.5 mm^3 |
Weight |
1.2 kg |
Sealing |
Anit-sweat |
Feature:
Detector:back-thinned CCD, TE-cooled down to -10 ℃
CCD parameters:2048×64pixel, 14×14um
Ultra-low noise CCD signal processing circuit
Spectral range: 180-1150nm
Spectral resolution: 0.1-2 nm(depend on spectral range, slit width)
Optical path:crossed Czerny-Turner (C-T)
Integration time:2ms-130s
power supply:DC 5V±10% @ <2.3A
18 bit, 570KHz A/D Converter
Entrance connector:SMA905 connector or free space
Output interface: high-speed USB2.0 or UART
20 pins, dual rows programmable extension connector