ATP3000 is a low-noise, high-resolution, uncooled spectrometer. It employs 2048pixels CCD sensor spectral response covering UV to NIR wavelength. Readout speed reaches up to 10MHz, low noise signal process circuit, and fast and accurate spectral data collection.
ATP3000 supplies power directly via USB port and outputs data via USB2.0/UART, and it's convenient to apply integration.

DETECTOR
Detector Type	Linear CMOS
Effective Pixels	2048
Pixels Dimension	14μm×200μm
Detector Model	Hamamatsu S11639
Sensitivity	1300 V/(lx•s)
Dark Noise	13 RMS @ 13 ˚C
OPTICAL PARAMETER
Wavelength Range	350-800nm, 200-400nm, 200-850nm, 200-1000nm, 600-1000nm, 800-1000nm
Optical Resolution	0.06-2nm
Signal-To-Noise	>1000:1
Dynamic Range	10000:1
Working Temperature	-10 to +50˚C
Numberical Aperture	0.11
Working Humidity	< 90%NC
Trigger	YES(IN and OUT)
Cooling Temperature	uncooled
Full Well	NA
Scanning Rate	< 1 kfps
OPTICAL CONFIGURATION
Optical Design	f/4 crossed Czerny-Turner
Focal Distance	77.5 mm for incidence / 112 mm for output
Incident Slit	50 μm (5,10,25, 50,100,150,200 um are optional)
Incident Interface	SMA905 connector or free space
ELECTRICAL PARAMETER
Integration Time	1 ms - 80 s
Interfaces	USB 2.0
A/D Conversion Resolution	16bit
Supply Voltage	DC4.5 to 5.5 V (type @5V)
Operating Current	<350 mA
Storage Temperature	-30°C to +70°C
Operating Temperature	-10°c to + 50°c
PHYSICAL PARAMETERS
Dimension	170×110×52 mm^3, equal to 6.7×4.3×2 inch
Weight	0.38kg
Sealing	Anti-sweat

Feature：
Resolution: 0.01-2 nm
Detector pixels：2048
High sensitivity：1300V（lx.s）
Response range：from UV to NIR
Maximum readout speed：10MHz max
Optical path：crossed C-T
Integration time：1ms-65535ms
Power supply：USB port
Light input connector: SMA905 or free space
Data output connector：USB2.0(High speed) or UART