◆Specifications:
Wavelength(nm) | Model | Output power (mW) | Data sheets |
ATP2002 built in pulsed xenon driver has a low-noise, high-performance, and cost-effective. The sensor used 2048 pixel CCD responding from 200-1100 nm.
ATP20002 is ideal for fast-detect because of high A/D converter frequency and the high-speed data transmission. In the memory chip is available for some solid programmed algorithms that can improve the performance, such as wavelength calibration coefficient, linearity coefficient. It transfers spectrum to PC through USB 2.0 or RS232 interface. ATP20002 operates with a single +5VDC supply supplied from USB or duo-pin interface.
DETECTOR |
Detector Type |
Linear COMS |
Effective Pixels |
2048 |
Pixels Dimension |
14μm×200μm |
Detector Model |
Hamamatsu s11639 |
Sensitivity |
1300 V/(lx·s) |
Dark Noise |
13 RMS @ 13 ˚C |
OPTICAL PARAMETER |
Detect Range |
200-1100 nm |
Wavelength Range |
350-800nm, 180-410nm, 200-850nm, 300-1100 nm, 200-1050nm, 780-1100nm |
Optical Resolution |
0.1-3 nm |
Signal-To-Noise |
>600 : 1 |
Dynamic Range |
8.5 x 107 (system); 2000:1 for a single acquisition |
Working Temperature |
-10°c to + 50°c |
Numberical Aperture |
0.11 |
Working Humidity |
< 90%RH |
Trigger |
YES(IN and OUT) |
Cooling Temperature |
uncooled |
Full Well |
NA |
Scanning Rate |
< 1 kfps |
OPTICAL CONFIGURATION |
Optical Design |
f/4 crossed asymmetrical Czerny-Turner |
Focal Distance |
40 mm for incidence / 60 mm for output |
Incident Slit |
50 μm (5, 10, 25, 100, 150, 200 um are optional) |
Incident Interface |
SMA905 connector |
ELECTRICAL PARAMETER |
Integration Time |
1 ms - 80 s |
Interfaces |
USB 2.0 |
A/D Conversion Resolution |
16 bit |
Supply Voltage |
DC4.5 to 5.5 V (type @5V) |
Operating Current |
170mA@Typ. |
Storage Temperature |
-30°C to +70°C |
Operating Temperature |
-25-50 °C |
PHYSICAL PARAMETERS |
Dimension |
102×72×36.3 mm^3 |
Weight |
0.38kg |
Sealing |
Anti-sweat |
Features:
Built-in pulsed xenon driver
Spectral region: 200-1000 nm
Spectral resolution: 0.2-5 nm
Optical configuration: crossed Czerny-Turner
Linear low noise CMOS detector with 2048 pixel
Integration times: 0.1ms-256s
Supply voltage: DC 5V (USB Power)
16 bit, 2MHz A/D Converter
Interface: USB2.0 (High speed)
20-pin connector for interfacing to external products