ATP2000H UV-Vis spectrometer is a low-noise, high-performance, high flame speed(Available in customized flame speed). The sensor used 2048 pixel CCD responding from 185-1100 nm.
ATP2000H derive from ATP2000P series, the same outlook as ATP200P, and it uses CMOS detector, SNR is improved 6 times higher than ATP2000P, sensitivity is improved 2 times higher, and noise is only one third left. Its characteristic is high flame speed. and it's ideal for fast-detect because of high A/D converter frequency and the high-speed data transmission. In the memory chip is available for some solid programmed algorithms that can improve the performance, such as wavelength calibration coefficient, linearity coefficients. It transfers spectrum to PC through USB 2.0 or RS232 interface. ATP2000H operates with a single +5VDC supply supplied from USB or duo-pin interface.

DETECTOR
Detector Type	Linear CMOS
Effective Pixels	2048
Pixels Dimension	14μm*200μm
Detector Model	Hamamatsu S11639
Sensitivity	1300v/(lx.s)
Dark Noise	0.4mVrms
OPTICAL PARAMETER
Wavelength Range	350-800nm, 180-410nm, 200-850nm, 300-1100nm, 200-1050nm, 780-1100nm
Optical Resolution	0.1-3 nm
Signal-To-Noise	>600 : 1
Dynamic Range	5000
Working Temperature	-10°c to + 50°c
Numberical Aperture	0.11
Working Humidity	< 90%RH
Trigger	YES(IN and OUT)
Cooling Temperature	uncooled
Full Well	NA
Scanning Rate	> 4 kfps
OPTICAL CONFIGURATION
Optical Design	f/4 crossed asymmetrical Czerny-Turner
Focal Distance	40 mm for incidence / 60 mm for output
Incident Slit	50 μm (5, 25, 100, 150, 200 um are optional)
Incident Interface	SMA905 or free space
ELECTRICAL PARAMETER
Integration Time	1 ms - 80 s
Interfaces	USB2.0
A/D Conversion Resolution	16bit
Supply Voltage	DC4.5 to 5.5 V (type @5V)
Operating Current	240mA@Typ.
Storage Temperature	-30°c to + 70 °c
Operating Temperature	-10-50 °C
PHYSICAL PARAMETERS
Dimension	102×72×36.3 mm^3
Weight	0.38kg
Sealing	Anti-sweat

Feature：
Spectral region: 185-1100 nm
Scanning speed: >4Kfps, customized to users specific demands
Pixel combined to speed up
Spectral resolution: 0.1-5 nm
Optical configuration: crossed Czerny-Turner
Linear low noise CMOS detector with 2048 pixel
Integration times: 0.1ms-256s
Supply voltage: DC 5V (USB Power)
16 bit, 2MHz A/D Converter
Interface: USB2.0 (High speed)
20-pin connector for interfacing to external products